Omega Engineering Model DP25-E Process Meter

PDFPrint
Sales price $110.00
Tax amount
Price / kg:
Prod SKU: 1000357
1000357-02
Description

Process and Strain Models


The DP25-E process meters accept a wide range of dc voltage and current inputs to cover any typical process application. They feature easy front panel scaling to virtually any engineering units, selectable excitation of four voltages to work with most transducers and transmitters, front panel and remote tare function for weighing applications, and a hardware lockout to prevent unauthorized changes in set-up.

Process & Strain Meters / Controllers Specifications


Input Ranges: 0-100 mV, ±50 mV, 0-10 V,
±5 V, 0-20 mA, 4-20 mA
Isolation: 354 V peak per IEC spacing
NMR:
60 dB
CMR:
120 dB
Protection:
240 V rms max for voltage input ranges;
200 mA for current ranges
Input Impedance: 100 Mfor 100 mV or
±50 mV range; 1 M
for 10 V or ±5 V range;
5
for 20 mA current input
Display:
4-digit ,14-segment, 13.8 mm (0.54") height
Analog-to-digital technique:
Dual slope
Internal resolution:
15-bit
Read rate:
3/sec
Polarity:
Automatic
Max error strain/process:
±0.03% rdg
Span tempco:
±50 ppm/°C
Step response:
1-2 sec
Warmup to rated accuracy:
30 min
Analog output (optional):
0-10 V, 4-20 mA or 0-20 mA; can be assigned to a
display range or proportional control output with
setpoint #1 when used as a control output
Excitation voltage: 24 V @ 25 mA or 12 V @ 50 mA;
10 V @ 120 mA or 5 V @ 60 mA

Process and Strain Models
The DP25-E process and strain meters accept a wide
range of dc voltage and current inputs to cover any
typical process application. They feature easy front
panel scaling to virtually any engineering units,
selectable excitation of four voltages to work with most
transducers and transmitters, front panel and remote
tare function for weighing applications, and a hardware
lockout to prevent unauthorized changes in set-up.